Can Trailer Lights be Install on Jeep Wrangler JK Using Warrior Products Steel Tail Light Mounts
Question:
Hi, can you please let me know if I can install the following LEDs on the Steel Tail Light from Warrior Products -steel-tail-lights-with-stop-reverse-light-cut-outs-pair-and jk-steel-tail-lights 1 STL101RMB with A45GB rubber grommet - used as a tail/stop tail light 2 MCL155AB with A54GB rubber grommet - used as a turn light and 3 MCL11AKB - used as a turn light. Thank you, and I look forward to hearing from you.
asked by: Shree S
Expert Reply:
To install light # STL101RMB with grommet # A45GB the hole would have to be 4-1/2 inches. And to install light # MCL155AB with grommet # A54GB the hole has to be 2-5/16 inches in diameter.
I am not sure where you would put light # MCL11AKB on those mounts you mentioned but it requires an 11/16 inch diameter hole. This last light is a clearance or side marker light. It is not DOT approved as a turn signal.
Since we do not carry the mounts you are looking at you would have to go by the dimensions of the holes needed to install the lights to determine fit.
Products Referenced in This Question
Rubber Grommet for 4" Round Trailer Lights - PVC
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 4 Inch Diameter
- Grommet
- Round
- Optronics
more information >
2" Round Grommet - Flush Mount - Open Back
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 2 Inch Diameter
- Grommet
- Round
- Optronics
more information >
Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3/4 Inch Diameter
- Amber
- Optronics
more information >
GloLight LED Trailer Tail Light - Stop,Turn,Tail - Submersible - 21 Diodes - Round - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4-5/16 Inch Diameter
- Red
- Optronics
more information >
Product Page this Question was Asked From
GloLight LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Round - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 2 Inch Diameter
- Amber
- Optronics
more information >
Continue Researching
- Search Results: rim
- Q&A: Metal Thickness for Installing Uni-Lite LED Clearance and Side Marker Light with Grommet
- Search Results: clearance lights
- Search Results: airbags
- Search Results: pintle ring
- Search Results: cone nuts
- Search Results: firestone air bags
- Shop: Coupler Pin w/ Chain - 5/16" Diameter x 2-1/2" Long
- Shop: Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Amber Lens
- Shop: Buyers Products 2-1/2" I.D. Forged 4-Bolt Mount Lunette Ring - Black
- Shop: etrailer Spare Tire Mount for Trailer with Angle-Iron Railing - Clamp On
- Shop: Buyers Products 2-1/2" I.D. 4-Bolt Welded Mount Lunette Ring
- Q&A: Using Redline # 25-51 Wheel Stud on Fayette Dayton Brake Drum
- Search Results: cam bar latch
- Shop: Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Silver Powder Coat
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Article: Most Popular Wheel Bearings
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Shop: Base Plate for Tow Bar