Does the Curt Friction Sway Control Have to Be 24 inches from Coupler to Bracket
Question:
I dont quite have 24inch to mount the sway kit on my trailer. Really it will end up being 22inch at best. Can I still install this it should I return the kit. 21foot enclosed Snowmobile trailer with little room on the tongue.
asked by: Andy
Helpful Expert Reply:
You really want to get the distance between the coupler ball and the mounting bracket on the mounting plate to be right at 24 inches. Otherwise the warranty would be voided. The only other option I can think of would be to try the other side of the trailer frame. There might be more room there to allow for the kit to be installed.
I attached an install video for a very similar sway control kit to the right for you to check out.
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Curt Hollow Shank Accessories Anti-Rattle Kit Review
- Shop: Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Curt Sway Control Hitch Ball
- Search Results: 4 way to 7 way connector
- Search Results: 7 way 4 way connector
- Search Results: etbc7
- Video: Performance Tool Hook Probe Circuit Tester Review
- Video: Tow Ready Wiring 18140 Review
- Video: Review of Curt Wiring Accessories - 7-Way Connector Plug Bracket - C67UR
- Video: Hopkins 7-Way and 6-Way Trailer Connector Universal Mounting Bracket Review
- Video: Curt Wiring - Wiring Adapters - C57102 Review
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Curt Anti-Rattle Kit for Hollow Shank Accessories - 2" Hitch
- Shop: Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long
- Q&A: Length of Curt Sway Control Ball Mount part # D320
- Q&A: Does Trailer Hitch Ball And Sway Control Ball Need To Be Level
- Q&A: Recommended Anti-Rattle Device For a 2" Receiver For Trailer Towing
- Shop: Brake Controller
- Q&A: Wiring Mighty Cord 4-Way to 7-Way Adapter on Tow Vehicle
- Q&A: Converting 4-Way Trailer Connector to 7-Way on 2018 Toyota Highlander
- Video: Curt Weight Distribution Systems Friction Sway Control Review
- Shop: Tuson Asymmetric Sway Control - 1 to 4 Axles
- Search Results: sway control
- Q&A: Finding the Serial Number on a Roadmaster Sterling Tow Bar to Use Adapter for Blue Ox base Plates
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: sway control only
- Q&A: Preset Tension Setting for Curt Sway Control
- Search Results: sway ball