Distance from Swivel Bolt Hole to Mounting Surface of CE Smith Heavy Duty Swivel Bracket # CE10206G
Question:
my bracket is 3 1/2 long 1 1/2 wide 2 inch high base holes are 2inch on center hole on base , swivel hole is 1 1/2 up from base . 2004 loadmaster tri axle trailer used to hold front bunks, what is the hight of the swivel hole on your bracket thanks
asked by: Rich
1
Helpful Expert Reply:
I went and pulled a CE Smith Heavy Duty Swivel Bracket # CE10206G from our warehouse and measured the distance from the center of the swivel hole to the base and found it to be 1-1/4 inches.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
CE Smith Heavy Duty Swivel Bracket - Galv Steel - 2-1/2" Hole Centers - Qty 1
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- 2 Inch Tall
- 1-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Q&A: What Hardware is Required for Assembly of the CE Smith Swivel and Bolster Bracket
- Q&A: Should a Nylon Bushing Be Used With the Open Eye End Of Slipper Spring # e33SR
- Q&A: Karavan Tandem Boat Trailer Slipper Spring Replacement, is Bushing On Hook End Required
- Q&A: Adding Bunks to 20 Foot Boat Trailer with Deep V Hull
- Q&A: Replacement Slipper Spring Needed That is 1-3/4 Wide and 27-1/2 Long
- Q&A: Dimensions of CE Smith Double U-Bolt Bolster Bracket # CE10196G
- Q&A: How Many Screws Are Included With The Stainless Steel Hex Lag Screw # FA74521?
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Tire Sizing
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams