Smallest Pilot Hole on a Trailer Wheel to Fit Dexter 2K Pound Idler Hub # 8-258-5UC1-EZ
Question:
What Minimum Size Wheel Pilot Hole Will Fit Dexter Trailer Hub part # 8-258-5UC1-EZ
asked by: Matt
0
Expert Reply:
Dexter trailer hub # 8-258-5UC1-EZ is compatible with 13 to 15 inch wheels. On a 12 inch wheel with the same 5 on 4-1/2 bolt pattern the pilot hole size is 3.19 inches. I do not recommend going any smaller than that.
The pilot hole can be larger, just not smaller.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Availability of Hubs that Fit 2,200 lb Lippert Axle Spindles
- Q&A: Recommended Spring Seat for a 2,200 lbs Axle w/ a 1-3/4" Diameter
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Recommended 5 on 4-1/2 Idler Hub for a Dexter D20 Axle
- Article: Most Popular Wheel Bearings
- Q&A: Agricultural Hub Replacement with 6 on 6 inch Bolt Pattern and Bearings LM67048 and 25580
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Article: My Trailer Hitch Doesn't Fit
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub