Brake Controller Recommendation for 2007 Silverado 1500 Crew Cab Towing a Car Trailer

Question:

Hello, I have a 2007 Silverado 1500 crew cab new body style. Im looking to hook up an electric brake controller due to towing a car trailer with 2 axles, 1 of which has brakes. What would be the best brake controller and is there a plug and play wiring harness that I can get for easier install? Thank you

asked by: Jeremy H

Expert Reply:

I recommend going with the Tekonsha Prodigy P2 Trailer Brake Controller, # 90885, for your 2007 Silverado 1500. The P2 activates trailer brakes in proportion to your vehicle's braking action and automatically adjusts the trailer's braking based on the deceleration of the tow vehicle.

Although the needed wires are already run, no plug is present under the dash so you will need to connect the brake controller wiring to your vehicle wiring. I have attached a link to an installation video that should be helpful. Unfortunately your Silverado doesn't allow for a plug and play option.

I have also included an article which covers the brake controller installation process for your Silverado. This article is a great resource that gives step-by-step instructions, including pictures, to walk you right through the installation. The section on finalizing connections for the brake controller is especially helpful because although GM ran the wiring, the power for the brake controller and the 7-way were not connected. This article also covers the steps on how to connect the 12-volt power lead.

expert reply by: Leah S