Will the Pro Series RB3 Weight Distribution System part # PS49582 fit a 3x2 Trailer Frame

Question:

I have a travel trailer with a tongue frame size of 3x2. Will the frame brackets on this WD hitch fit? Thx

asked by: Cat

Expert Reply:

If the width of your trailer frame is 2 inches and the height is 3 inches the Pro Series RB3 Weight Distribution System part # PS49582 would work well for you since it can fit 2 inch wide frames.

If your frame is wider than 2 inches you could get the Reese Chain Hanger Brackets part # RP58305.

I attached an FAQ on weight distribution systems for you to check out.

expert reply by: Jameson C

Aaron D.

5/21/2020

I have the same frame, 3x2", however my tongue weight is only 430 lbs and I would like sway control in addition to weight distribution. I spent over two hours researching on multiple different websites and forums and couldn't find a weight distribution hitch with sway control that tells me if it will fit a 2" wide frame. Help please!

Chris R.

5/25/2020

If your trailer frame is 3" tall and 2" wide, the Equal-i-zer Weight Distribution System # EQ37060ET will work perfectly. If the frame is 3" wide, you may just need to obtain longer bolts for the frame brackets.