Distance from the Pin Hole to Bottom Portion of the Ball Mount Platform
Question:
BM20 What is the distance from the rear hitch pin hole to the closest point of the ball mount when in the rise position? Thanks
asked by: Ed
1
Helpful Expert Reply:
I pulled a Brophy Ball Mounts # BM20 from our warehouse and measured the distance from the center of the hitch pin hole to the nearest portion of the ball platform in the rise position on the bottom of the ball mount and found it to be 9-3/4 inches.
Check out the picture I attached.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Brophy
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Safety of Using Hitch Extender and Other Options To Clear Spare Tire on Jeep Liberty
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Difference Between Brophy # BM20 and # BH20 Ball Mounts
- Q&A: Stowed Length of ARK ORJW1SU Off Road Trailer Jack
- Q&A: Will Extreme Ratcheting Trailer Jack Keep Moving Forward without Handle if in Forward Position
- Q&A: Extended and Retracted Height of ARK ORJW1SU Extreme Off-Road Ratcheting Trailer Jack
- Article: Hitch Adapters and Extenders
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Why Does Use of Hitch Adapter/Extender Reduce Hitch Tongue Weight and Trailer Weight Ratings
- Q&A: How to Carry a Bike Rack and Tow a Trailer At the Back of a Tow Vehicle
- Article: How to Choose the Right Trailer Hitch Class
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Stability Control for Heavy Duty Vehicles