How to Ground Trailer Brakes on an Aluminum Trailer
Question:
I have an aluminum dual axle cargo trailer which has electric brakes. Is grounding to the aluminum frame sufficient enough? If not, please give me some advice for proper grounding. Thanks,
asked by: Ray S
0
Expert Reply:
On an aluminum trailer I would recommend you ground the brakes by running the ground wire back up to the ground circuit of the connector on the trailer. Aluminum frames do not make the best ground points so I wouldn't ground the assemblies to the frame. You would most likely have pretty weak braking performance if you did.
I attached an FAQ on wiring that you might find helpful also.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements