Which Tire and Wheel Combos are Recommended for Trailer Hub # AKIHUB-440-2-1K
Question:
what size tire and wheel for this hub
asked by: Justino
Expert Reply:
Trailer hub assembly # AKIHUB-440-2-1K is good for 8 to 12 inch wheels with a 4 on 4 bolt pattern. The hub is designed for 2,000 pound axles so to match that capacity and if you want a wide tire you can use a 205/65-10, load range C, # AM3H370. This tire and wheel combo will be 8.3 inches wide and 20-1/2 inches tall.
If you wanted to go with a 12 inch tire you can use tire and wheel combo # AM30780. It will be 5.6 inches wide and 21.9 inches tall.
And if you want to go with a 13 inch, use # AM3S030. It will be 6.6 inches wide and 24 inches tall.
Each of the tires in these tire and wheel combos is rated slightly higher than 1,000 pounds each so they would work out well on a 2,000 pound axle. I have linked video reviews of each for you.
Products Referenced in This Question
Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 5.30-12
- 12 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 205/65-10
- 10 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 175/80-13
- 13 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Tire Sizing
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Measuring For Replacement Idler Hubs On a 1997 Scamper 23L Pop Up Camper
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure a Trailer Axle