Will Installing Higher Rated Leaf Springs on a Trailer Give it More Capacity.
Question:
I will soon be starting to building a house on wheels, I do have a 22 feet trailer with two 3500 lb. axles, My question is: if I add a leaf to the springs, or new springs, it will change the axles rate.
asked by: Pat R
Expert Reply:
If you add higher rated leaf springs on your 22 foot trailer the suspension will have a higher capacity, but trailer capacities are more than just based on the spring rating used. Your capacity will only be as high as the weakest component in the setup. Other things to consider are, axle ratings, hub capacity, and frame capacity. Your best option would be to use 3,500 lb axle rated leaf springs since that is the capacity of your axles.
I attached an FAQ on trailer springs for you to check out also.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Breaking In Replacement 6,000 lbs Leaf Springs
- Q&A: Recommended Lift Kit for 2021 Forest River Gray Wolf Travel Trailer
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Article: Trailer Wiring Diagrams
- Q&A: What Leaf Spring Width SHould be Used with Dexter Over Under Kit # K71-384-00
- Q&A: How to Increase Trailer Ground Clearance Using an Axle Over-Under Kit
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current