What are The Towing Capacities for Trailer Hitches for 2003 Ford Escapes
Question:
hey guys. thanks for your help. on these hitches for the 2003 ford escape... what is the weight capacity? i want to be able to pull a auto transport with one car weighing 3 thousand pounds. thanks in advance.
asked by: Wilson C
Expert Reply:
The Class III 2 inch hitches available for a 2003 Ford Escape have a gross towing capacity of 3,500 pounds, meaning that the trailer and everything on the trailer must weigh less than 3,500 pounds. But you also have to factor in the towing capacity of the vehicle, if it is less than the hitch capacity, you must go by the vehicle capacity. The 2 inch hitch I recommend for your vehicle is the Draw-Tite Class III Trailer Hitch # 75118.
The Class I trailer hitch available for your Escape will not offer a high enough capacity to tow a 3,000 pound vehicle on a car trailer.
According to my research, if you have the 4 cylinder Zetec engine, you have a maximum trailer weight of 1,000 pounds. If you have the 6 cylinder Duratec, your maximum is 2,000 pounds and if you have the 6 cylinder Duratec with towing package, your maximum is 3,500 pounds.
You can find out in your owner manual if you have the tow package or not. If the car you are wanting to tow weighs 3,000 pounds and your trailer is full auto trailer, your setup could easily exceed 3,500 pounds.
Exceeding the weight rating of the vehicle or hitch could cause engine damage, transmission damage, hitch failure and the hitch could rip out of the frame of the vehicle.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Can a 1-1/4 Inch Bike Rack be Used in a 2 Inch Trailer Hitch Receiver
- Q&A: Availability of Pull Wire to Install Draw-Tite Class III Hitch # 75118 on 2003 Ford Escape
- Q&A: Trailer Hitch and Wiring for a 2004 Ford Escape without Factory Tow Package
- Q&A: Trailer Hitch Fit for 2021 Honda CR-V Hybrid
- Q&A: Will Curt Trailer Hitch Receiver Fit 2023 Honda CR-V Touring Hybrid
- Q&A: Safety of Using Hitch Extender and Other Options To Clear Spare Tire on Jeep Liberty
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Rust Prevention
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)