Replacement Wheel Bolts For Folding Utility Trailer
Question:
I have an old folding utility trailer with the original 8inch wheels. I have 12inch wheels and tires in my cart to buy from you right now, but I know I a going to have to cut the old lug bolts off of the 4 on 4 wheels. There is no chance of loosening them. What lug bolts and nuts will I need to purchase to replace them? I hope you know. I figure you must have had this question before what with how popular those red utility trailer frames are.
asked by: Mark C
Expert Reply:
One of the wheel bolts we offer are Redline Wheel Bolts, part # RG02-020. These are 1/2-20 bolts which are the standard for many hubs, drums, and wheels. They also have the industry standard 60 degree cone and are fine threaded.
The 1/2 inch lug nut we offer is part # CE11051. These fit 1/2 inch wheel bolts.
If you can possibly loosen at least one of the lug bolts you currently have we would have a better chance of trying to find the replacement you need.
I recommend calling your trailer manufacturer to find out what lug bolts are installed on your trailer. They should be able to tell you exactly what wheel hardware was used on your trailer. This woudl remove any guesswork for replacement parts.
![Jeffrey L](https://images.etrailer.com/static/images/catg/people/560_tn.jpg)
Products Referenced in This Question
CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 1/2 Inch Wheel Bolt
- Hex Nut
- 13/16 Inch Outer Diameter
- 60-Degree Cone
- Zinc-Plated Steel
- CE Smith
more information >
Product Page this Question was Asked From
Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Bolts
- 1/2 Inch Diameter
- Fine Thread
- 1 Inch Long
- Redline
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Wheel Bolts For Trailer With Threaded Hubs
- Article: Trailer Tire Sizing
- Q&A: Replacement Hub/Drum And Brakes For a 2018 CrossRoads Cruiser Aire 28RD With Lippert 4.4K Axles
- Q&A: Are Longer Wheel Studs Needed for Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Is 14" Galvanized Wheel or 14" Silver Powder Coat Wheel Recommended for Boat Trailer
- Q&A: Replacement Wobble Roller Needed with 1 Shaft for Older Boat Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Replace or Install an RV Roof Vent
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)