OEM-Style Trailer Wiring Harness for 2011 Nissan Rogue SV

Question:

I have a PREWIRED 2 wire connector in trunk of my 2011 Rogue SV, that I want a compatible tconnector wiring for trailer lights. Do you have one that plugs into this? A feature of the SV model is that it comes prewired for trailer but its mainly the power connector in the back so you dont have to run wire to battery. MOdel # of Nissan part is 99998-43009 do you have a compatible product similar to this I can buy? Having a tough time finding something. Thx

asked by: Steve

Expert Reply:

We do offer a custom 4-pole trailer wiring harness for the 2011 Rogue that plugs in at the tail light assemblies, part # 118480 from Tow Ready. This product wires in to your Rogue at a different point than the OEM harness which we do not offer. I have linked an installation video showing the process in a 2011 Rogue.

The Tow Ready harness does require a 12V power input to its red wire (made through the included wire and fuse holder). Normally this wiring connection is run up along the vehicle frame to the engine compartment for connection to the battery positive terminal, but if your vehicle has a harness at the rear that carries 12V power you could potentially tap into that for your power source. However, we do not offer a mating connector so you would need to use a quick-splice (like # SWC501915-1) or butt connector (like # DW05714) to tap into the 12V power wire.

expert reply by: Adam R