What Size Pilot Holes are Used for Bolts that Attach the Dual Cam # RP66074 Frame Plates
Question:
What size pilot hole for the self tapping screws?
asked by: Terry L
0
Expert Reply:
If you are speaking of the screws used to fasten the dual cam frame plate, the hole size will depend on whether you have a tubular steel or C-Channel frame. If you have the tubular frame, you'd drill a 7/16 inch pilot hole, or a 17/32 inch hole if you have a C-Channel frame.
The tubular steel frame would use the self-threading bolts, and the C-Channel frame would be through-bolted. You can see this on page 6 and 7 of the instructions I've linked.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Installing a Brake Controller in 2014 Dodge Ram Pickup
- Q&A: Does The Curt True Course Allow The User To Adjust Its Sensitivity?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: 2-5/16 Inch Ball for Reese SC Weight Distribution System # RP66131
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size
- Q&A: Can the Curt True Course Sway Controller Be Used With the New StabiliTrak Electronic Sway Control