Replacement Idler Hub Assembly With LM67048 Inner and LM11949 Outer Bearings
Question:
I need a replacement hub assembly for an old trailer. It’s stamped with 10 35214-R, has LM67048 inner bearings and LM11949 outer bearings. The hub is 3.5” tall and a the bolt pattern is 5 on 4-3/4”. Do you have a replacement for this hub? Thank you.
asked by: Aaron S
0
Expert Reply:
The Dexter Trailer Idler Hub Assembly # DX22XR you found is our only idler hub which uses the LM67048 inner and LM11949 outer bearings and has a 5 bolt pattern. Unfortunately this is the 5 on 4-1/2" bolt pattern and not the 5 on 4-3/4" you already have. So you would need to change your wheels to the more common 5 on 4-1/2" pattern.
expert reply by:
Bud M
0
![Bud M](https://images.etrailer.com/static/images/catg/people/2449_tn.jpg)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- LM67048
- LM11949
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Article: Most Popular Wheel Bearings
- Q&A: Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Q&A: Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Q&A: Replacement Needed for the Titan Hub T1721400042
- Q&A: Recommended Hub for 3K Trailer Axle with 1.25" Inner and .75" Outer Bearing
- Q&A: Bolt Pattern Referred To In Hub and Wheel Fit
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure a Trailer Axle
- Article: Using a Portable Generator on RV