B&W Gooseneck Bracket Kit for a 1999 Chevy Silverado 2500

Question

Question:

Can I buy just the brackets for a 1999 Chevy 2500 LD 8foot bed 4x4?

asked by: John

0

Expert Reply:

Hey John, thanks for reaching out!

To get just the brackets of the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1059 for your 1999 Chevy Silverado 2500 you need the Installation Kit # BWGNRM1059.

expert reply by: Jon G

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

According to B&W the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1020 is about a 2 hour install by a professional. All the Hardware is provided. I have attached the installation instructions so you…

view full answer...

Answer 3

Pace Edwards has two confirmed fitting Switchblade covers for your 2024 Chevy Silverado 3500 DRW 8' bed; part #PE87CV, which is an aluminum and vinyl mix and part #PE77CV, which is just aluminum.

view full answer...

Answer 4

When installing the B&W Turnoverball Gooseneck Trailer Hitch #BWGNRK1016 on your 2019 Chevy Silverado 2500 short bed the center of the 4 inch hole will be located 44-3/4 inches from the rear of the truck bed. I have attached an image from the…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, you can and it'll allow you to keep the one on your bumper. I recommend the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector item #C57010. This harness puts a 7-way connector in the bed of your 2024 Ford F-250 and makes…

view full answer...

Answer 7

Hey Jim, congrats on the new truck and fifth wheel - looks great. Our rule of thumb is that you want a minimum of 6" of clearance between the top of the bed rails and the bottom of the trailer loft. You should be just fine to use the bottom hole…

view full answer...

B&W Gooseneck Bracket Kit for a 1999 Chevy Silverado 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching