Troubleshooting Grand Design Reflection 6K Leaf Spring Bent From Equalizer
Question:
I replaced the factory 4 leaf springs on my Grand Design Reflection with e94sr springs. The center equalizer seems to be binding up and it bent the rear of the front spring. Do you have a measurement for the distance between the hangers? I feel like they are too close. Mine is 30 1/2 inches from center to center. Can send a picture if that would help. Thanks
asked by: Jim K
Expert Reply:
Hey Jim, thanks for reaching out and for sending the photos in!
The 30-1/2" measurement you took seems to be about right. If the equalizers started binding up then they may either need some grease for the bolts, or they may have been tightened too much. The equalizer needs the freedom to move back and forth so the bolt won't be tightened down as hard as it can go.
You might also make sure that your shackle straps are the same length as the ones that came from the factory (center hole to center hole). If they are longer then that might be causing what you're seeing.
You definitely need to replace your 6K Leaf Spring(s) # e94SR though as it isn't safe to tow with it in that shape.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Q&A: Correct MORryde Rubber Equalizers for Forrest River 31QBH with 5,200 lb Lippert Axles
- Q&A: Replacement Leaf Spring For Dexter Leaf Spring # 072-099-01
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Recommended Replacement/Upgrade Suspension Kit for 2022 Forest River Wolfpack 325
- Q&A: How to Determine Correct 6,000 lb Double-Eye Leaf Springs For 5th Wheel Trailer
- Q&A: Do I Need To Remove Trailer Leaf Spring Before Measuring For Replacement?
- Article: Most Popular Wheel Bearings
- Q&A: Installing a MORryde MR27ZR on a 2020 Grand Design With Oddly Shaped Hangers
- Q&A: Determining Correct Replacement Leaf Springs For 2007 Keystone Montana5th Wheel W/ 6000lb Axles
- Article: Slipper Spring Trailer Suspension System Review