Can I Convert My Galvanized Boat Trailer With A Rectangle Axle To Leaf Spring Suspension
Question:
Question, I have a galvanized boat trailer with a rectangular axle tube. Can I still convert my leaf springs with this set up? The axle is not separate from the trailer its self. My only choice that I put the springs on top of the the fixed axle. Does that makes sense? Thanks for you time
asked by: Robert B
Expert Reply:
Hello Robert. It sounds like you are trying to convert your trailer over to leaf spring suspension. Does your trailer currently use a torsion axle? Because leaf spring suspension cannot be added to a torsion axle. If it is just a straight rectangle axle, it is possible to add leaf spring suspension.
Spring seats would need to be welded to the axle. We do not offer any spring seats for a square axle, but a spring seat like part # TRSS300 could potentially be modified to fit. You will also need a hanger and bolt kit like part # APS1 along with some appropriately rated leaf springs. If you can tell me the weight capacity of your axle I can recommend springs for you.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Redline
more information >
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Curt Relay Kit for Nissan Armada or Titan Aftermarket Tow Package
- Accessories and Parts
- Trailer Wiring
- Relays
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Torque of Mounting Nuts on Lippert Torsion Axle Lift Kit
- Q&A: Install Instructions Link for Lippert Lift Kit # LC382741
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Where to Position the Trailer Axle?
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Q&A: What Size Hardware Should Be Used With the Super Titan Forged Pintle Hook Plate
- Q&A: Will the Pintle Hook # 63015 Attach to the Super Titan Pintle Hook Plate # RP38186
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Article: How to Raise Your Travel Trailer Height
- Article: Best 2020 1/2-Ton Trucks for Towing a 5th Wheel
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop