bing tracking image
Q & A Icon

Lippert Ground Control Rear Jacks Will Not Retract After Auto Level On A 2014 Arctic For 5th Wheel  

Question:

Rear jacks will not retract after auto level. 2014 artic fox fifth wheel. Tried power disconnect. No luck,

0

Expert Reply:

Hey Norm. If power disconnect/reset is not working you could be dealing with a problem with the wiring harness or controller. Is the display showing an error code? If so, go to the comment section below and let me know what error code you are seeing That will really help to narrow down the appropriate troubleshooting steps. For example, a lot of times when we hear of this issue the display will show the RR error code which means to check harness connections at controller and at jack, check harness for damage and repair or replace as necessary.

expert reply by:
0
Jesse M

Norm B.

5/15/2024

Jesse Auto leveled okay with no error Attempted to retract and get a LM error. Now nothing will retract except front jacks. Will continue to attempt with power disconnect. What is LM error and can you forward me a list of error codes for future Thx for the help Nirm

Etrailer Expert

Jesse M.

5/16/2024

@NormB The LM (left middle) error code means there is an error at the left middle jack. This indicates a hall signal issue (open, short, malfunction or loss of communication); open or short circuit between controller and motor. You can use the following link to see the LCI owners manual for the ground control system. The error codes I mentioned are on page 17: https://lci-support-doc.s3.amazonaws.com/manuals/leveling-and-stabilization/ccd-0001498.pdf

Norm B.

5/16/2024

@JesseM Thx Jesse Wil keep chasing it. Norm
Etrailer Expert

Jesse M.

5/17/2024

@NormB Good luck! Let me know if there is anything else I can do to help.
See All (5) Replies to Norm B. ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>