bing tracking image
Customer Service My Orders
Q & A Icon

Extrusion Rails Needed For Mounting A Solera RV Awning To The Wall Of An RV  

Question:

Good morning, i just realized i need the strip to attach the awning fabric to the trailer, so do you have that part and can you send that out also with the solera xl 12vpower RV Awning? thanks mike s

0

Expert Reply:

Hi Mike,

Lippert only offers the extrusion rails in 8' lengths with part # LC715216 and # LC715217. Since you're needing 20' you'll have to purchase three and can then either have some extra overhang or cut it down to about 20-1/2' to 21' in length. I HIGHLY recommend using some butyl tape # AL28FJ on the back of the rails and then some non-sag sealant # 344270341437-1 on the top edge to help prevent any water from leaking into the wall. I would also use a bit of sealant over the butted up ends of the rails to keep a smooth transition and prevent water from getting in that way.

expert reply by:
0
Kevin C
Ask The Experts a Question >>

Products Referenced in This Question





Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for LCV000334969-362243
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>