Do You Have a 15" Wheel With 6-1/2" Bolt Pattern and a 3-9/16" Pilot Hole?
Question:
I need a plain wheel 15 inch 6 x 5.5 , 3 9/16 inch center, 7/16 inch studs. I need 3
asked by: Bob
0
Expert Reply:
The Dexstar Conventional Steel Wheel # AM20514 you found is the closest wheel we have to what you are needing. This is the 15" diameter with the 6 on 5-1/2" bolt pattern. The pilot hole center is 3.65" versus the 3-9/16"(3.56") and the wheels are drilled for a 1/2" wheel stud.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Article: Trailer Wiring Diagrams
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Q&A: Does a 2022 Chevrolet Silverado 3500 Short Bed Need a Sliding 5th Wheel Hitch
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Q&A: How to Add Tension to Solera Slide-Topper
- Article: How Long Can You Boondock in an RV?
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Q&A: Replacement Amber Lens for Trailer Light with SAE A P2 DOT 14
- Article: Stability Control for Heavy Duty Vehicles
- Article: Gooseneck Trailer Hitch Information and Review