Are Shorter Length Hub Assemblies Available
Question:
The hub length of this is 4 1/16, is there a shorter one available say 3 1/2?
asked by: Jonathan E
0
Expert Reply:
Hey Johnathan,
To get a smaller hub you'd have to go down in capacity, which likely would not fit your axle's spindle. Is there a reason you're needing a smaller hub?
expert reply by:
Kevin C
0
Spindle Measurement Guide
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Zerk Fitting For The UltraFab Weld-On Jumbo Steel Roller # UF48-979012
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Availability Of TLC65 Trimax Trailer Wheel Chock and Lock With A23456 Keys
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Q&A: Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball
- Q&A: Replacing AL-KO 10 x 1-3/4 Electric Trailer Brakes 2018 Airliner Classic Camper
Jonathan E.
4/16/2024
It’s a home built trailer that someone attach the spindle directly to the frame and the normal 4.2” hub length hubs the outer sits on the threads and I can’t reuse the og hub because the person who had it thought it was a good idea to weld the wheel to the hub.