Grease Seals For a Lippert 5,200LB Axle Under a 2015 Open Range Light 311FLR 5TH Wheel
Question:
Im in need of axle seals for the Lippert 5200 lb axles on my 2015 Open Range Light 311FLR Fifth Wheel. Can you provide the seal part numbers for my application?
asked by: Dwight D
Expert Reply:
The Lippert 5,200lb axle under your 2015 Open Range Light 311FLR 5TH Wheel is going to need 2 Seals # GS-2250DL per axle. We do have the Bearing Kit # BK3-300 which will contain the races, bearings, a seal and cotter pin for one hub. This would be good to keep on hand incase you find out any of the bearings and races are worn/damaged when you go to replace the seals.
We have the Seal Puller # PTW1219 and Install Kit # PTW83020 which will make removal and installation of the seals and races easier. We also have the Grease # L11390 that I recommend for your hubs with the Bearing Packer # PTW1218 to ensure you get grease fully pressed into the bearings before installing them
Products Referenced in This Question
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
7-Piece Installation Set for Bearings, Races, and Seals
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Tools
- Driver
- Performance Tool
more information >
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Fit of Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1313 with my 2006 Dodge 3500 8 Foot Bed
- Q&A: Will Firestone Air Bags Interfere if I Install a B&W Gooseneck Trailer Hitch for a 2004 Dodge 2500
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Support Leg for Lippert/Thule Crown Awning for Keystone Toy Hauler
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: Is There Differnce Between Trailer Grease Seals 10-36 and GS-2250DL
- Article: Enjoy The 2024 Eclipse With Harvest Hosts
- Q&A: Replacement Bearings and Seals for Curt 5.2K to 8K Axle
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Overview of Lubricating Grease
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
Dwight D.
4/9/2024
Hi Bud, Thanks for your reply. Did you mean two seals per axle or 2 per hub. Will I need 4 seals for two axles or 8?