Trouble Shooting Wiring Issues on a 2006 Toyota Corolla
Question:
Im experiencing a bizarre trailer light problem and am hoping someone there can help. Two of your plug and play adapters have been tried. Two different trailers have been tried. Same problem. So it must be somewhere in the vehicle. Vehicle is 2006 Toyota Corolla LE Symptoms with engine running: 1.Turn on flashers. 2. Working on car but not on trailer. 3.Unplug, wait at least 3 seconds, replug. 4.Trailer lights now flash. 5. Both turn signals may now work but if only one, unplug and replug gets it working. 6.Same deal if turn signals are tried prior to flashers. 7. Anytime I park and turn off the engine, same exercises must be performed to get lights working. 8. The 3 second requirement sounds like a capacitor somewhere in the car is involved but have no idea. If you cant help Ill understand. Thanks, Harold
asked by: Harold R
Expert Reply:
Hey Harold sorry to hear you're having so many issues. It sounds like you've got an electrical gremlin in your Corolla. I recommend checking your battery cables and make sure the connection to the battery is as clean as possible. We had a guy here who drives the same vehicle and he was having all sorts of electrical issues and cleaning off the terminals solved his problems.
The other suggestion I have is to check all the grounds and wiring connections starting at the trailer connector and working your way forward to the front your Toyota. A lose ground or improperly connected power wire would cause the intermittent problems you are experiencing. The Curt T-Connector Vehicle Wiring Harness item # 55542 requires a dedicated power line ran directly to your battery.
![Jerred H](https://images.etrailer.com/static/images/catg/people/2777_tn.jpg)
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: How to Increase the Clearance Between the Truck Bed Rails and the Bottom of a 5th Wheel Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Tip for Difficult to Engage Tool of Rhino Rack Pioneer Platform 2022 Toyota RAV4
- Q&A: How To Shift A 2021 Jeep Wrangler Transfer Case Into Neutral To Flat Tow
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Trailer Hitch Installation for 2022 Toyota Corolla Hatchback
- Q&A: No Blue Brake Output Wire at Back of 2002 Chevy Silverado 1500 to Install a 7-Way Connector
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Trailer Maintenance Schedule
Harold S.
3/18/2024
Problem solved. Autos with LED tail lights need only around 1/10 the current as those with incandescent lights so the wiring is reduced by the same amount. When a trailer with incandescent lights is plugged in, there is a voltage drop across the smaller wiring. Not enough to make the lights that much dimmer, but the mosfet in the converter goes wonky if the correct voltage is not supplied. Installed LED's in the trailer and lights work fine.