Where is Swagman Straddler Trailer-Mounted Bike Rack Carrier Made

Question

Question:

Hello, What is the country of manufacture? I did not see it listed anywhere.

asked by: Glenn S

1

Helpful Expert Reply:

The Swagman Straddler part # S80503 that you referenced is made in Canada.

expert reply by: Jameson C

1

Answer 1

Though this technically will work when looking at all the measurements, I cannot recommend doing so. Here's my reasoning behind saying that. With your fully loaded trailer having a tongue weight of 315 pounds and your loaded bike rack weighing 50…

view full answer...

Answer 2

You could use the Swagman Straddler #S80503 if you want to. However you have to stay within the capacity of the Straddler which is 100 pounds. That means the combined weight of the bike rack you use and the bikes cannot exceed 100 pounds. The Swagman…

view full answer...

Answer 3

Thanks for the pictures, that's a very cute dog! I have a solution for you but looking at the space, and motorized jack, on your Escape 21C travel trailer's tongue you are not going to be able to mount a e-bike capable rack. The Swagman…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 8

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 9

Only certain bike racks are rated for use at the back of an RV or trailer but the Hollywood Racks #HR1400Z bike rack is not one of them. Generally, any rack that can fold or tilt, with few exceptions, won't be rated for this applications. The…

view full answer...

Answer 10

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Answer 11

The Hollywood Racks RV Rider #HLY64FR has a frame clamp design that was intended for use with step through style bike frame like what your Aventon Adventure bikes have so this rack would work perfect for you. I attached a picture that shows this…

view full answer...

Answer 12

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

view full answer...

Where is Swagman Straddler Trailer-Mounted Bike Rack Carrier Made

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching