Best Guess On The Axle Rating On A 3" Diameter 28580 Inner and 25580 Outer bearings
Question:
Best guess on the axle rating that is 3inch diameter 28580inner bearing 25580outer bearing . The kicker is that it a duel axle trailer with 8 lug duel wheels. Thank you in advance.
asked by: Troy
Expert Reply:
Hey Troy, I am thinking that your axle is rated for either 9,000 or 10,000 lbs. The # 28580 inner and # 25580 outer bearings are the sizes for what we call a #99 spindle. The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. It is also most common for dual wheel trailers to use 9K or 10K axles. The 3" axle tube and 8 lug wheel also points to 9K or 10K.
We do not carry any axles or spindles of this type, we can get you new bearings and seals though. You can use part # 28580 for the inner bearing, # 25580 for the outer bearing, part # T51153 for the grease seal, and part # 6-96 for the spindle nut.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 28580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.000 Inch I.D.
- Bearing 28580
- Race 28521
- 7000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.375 Inch I.D.
- 3.623 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Availability of 5,200 lb Axle With Idler Hubs
- Article: Trailer Tire Sizing
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Idler Hub for Lippert 7k Axle that Has 6-Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between a Trailer Axle and Spindle
- Q&A: What Makes 5200lb and 6000lb Dexter Axles Different Capacity?
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How To Install The Advent Air RV Air Conditioner System With ACTH12 Thermostat
- Q&A: Why Would a Wheel Bearing Race Spin In the Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Gooseneck to 5th Wheel Adapters