Replacement Bearings and Idler Hub For a 2014 McClain Boat Trailer With 1,800LB Axle and 5 on 4-1/2"
Question:
Hi, I am trying to figure out what parts I need to rebuilt or replace the hubs on my boat trailer. I have a picture of the I.D. tag on the trailer. The info is as follows: Manufactured by: McClain Trailers, Inc. Date: 05/2014 GVWR 1800 lb GAWR 1800 lb per axle with SR175/80D B tire 13x4.5JJ rim at 35 PSI cold single V.I.N.: 4LYBG1818FH001170 TYPE: TRAILER MODEL: 1854-13 BFC Its a galvanized trailer for my Gator Trax mud boat with 5 x 4.5 bolt pattern. I believe they are EZ Lube spindles. Hopefully some of that information is helpful. Thanks for any help
asked by: Jason S
Expert Reply:
I reached out to McClain Trailers and they said you trailer is going to have the same components as a standard 3,500lb axle. So you could use our Bearing Kit # BK2-100 to replace the bearings, races and grease seal for one hub. We also have our Galvanized Hub # AKIHUB-545-35-G-EZ-K if you want all new components in an easy package that are ready to replace.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle