Trimming J-Hooks of Yakima Overhaul to Fit 2024 Nissan Frontier Better

Question

Question:

I have the Yakima Overhaul bed rack with j clamps to install on my 2024 Nissan Frontier. The M12 bolts that it comes with are too short for any real bite into the threading of the j clamp. Are there longer bolts available, or is it better to find someone that will cut my j clamps down and inch?

asked by: Robert H

0

Expert Reply:

Hey Robert, since there isn't a longer J-bolt option for your Yakima OverHaul part # Y01151-58 your best option would be to trim down the J-bolt so that it would allow more thread access like you mentioned. If you can get it so that you can see one thread on the opposite of the nut you'd be good.

expert reply by: Jameson C

0

Answer 1

The Yakima Overhaul HD Ladder Rack part #Y01151-5868 is designed to attach to the utili track you have in the bed of your 2013 Nissan Frontier and will allow you to keep using the utili track tool box you have. I'd put the ladder rack bar in…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 7

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 8

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 9

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Trimming J-Hooks of Yakima Overhaul to Fit 2024 Nissan Frontier Better

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching