Is The Karrier Radial Tire And Wheel # AM31994 Compatible With The Dexter Idler Hub # 84545BX
Question:
Will part # 84545BX work with part # AM31994
asked by: Michael A
Expert Reply:
Hi Michael,
Yes, the Karrier ST175/80R13 Radial Trailer Tire # AM31994 and Dexter Trailer Idler Hub Assembly for 3,500-lb Axles # 84545BX both have the same bolt pattern so they would be compatible together. You will want to ensure that the hub is compatible with your trailer's spindle though. This hub uses inner bearing # L68149 (1.378" inner diameter) and outer bearing # L44649 (1.063" inner diameter) and grease seal # 58846 (Inner diameter: 1.719"). If you aren't sure then you can measure the spindle at points B, C, and D with a set of calipers # PTW80157 to see if they match. If not, then let me know what you find and I'll look for a compatible replacement.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 175/80-13
- 13 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Comparing Tire Sizes ST185/80D13 and ST175/80R13 and Bias Ply/Radial Tire Construction
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Torque of Mounting Nuts on Lippert Torsion Axle Lift Kit
- Q&A: Install Instructions Link for Lippert Lift Kit # LC382741
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: Measuring a Trailer Tire
- Q&A: Recommended Replacement Tires For A 1997 Scamp Trailer
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Article: Trailer Wiring Diagrams