Parts Needed To Convert A Dump Trailer With Electric Drum Brakes To EOH Disc Brakes

Question:

I have a 2019 dump trailer with 7K dexter axles electric brakes and 16inch wheels,I would like to convert to EOH disc brakes and would perfer oil bath hubs if that is an option going for better braking and longivity.What conversion kit/parts would you recommend?

asked by: Kevin

Expert Reply:

Hey Kevin,

To convert over to EOH disc brakes we'll need to first know the bearing and seal part numbers to determine a compatible hub/rotor assembly. If the numbers are too worn you can measure the spindle with a set of calipers # PTW80157 at points B, C, and D to get the inner diameter.

Next you'll need an EOH Actuator like the Hydrastar # HBA16 to receive the signal from the brake controller and force fluid out through the lines to activate the brake assemblies.

From there you'll need a brake line kit, preferably with a hard line running from the actuator over to each brake assembly with a tee'd in soft line to the assembly to accommodate suspension travel. I recommend getting a rough estimate of the length from where the actuator will sit down the driver's side to the first brake assembly just to get an idea of how much line you'll need.

Next you'll just need an EOH compatible brake controller for the tow vehicle. I don't recommend using a factory brake controller as there is typically either no compatibility or too much of a delay in communication. If you need assistance finding a compatible brake controller then let me know the year/make/model of the vehicle.

We do offer a few packages that contain a majority of the parts you'll need all in one kit so once we have all the necessary info I'd be happy to find the best solution for you.