Can a Single Axle Boat Trailer Be Switched From a Slipper Spring Suspension to Double Eye
Question:
I have a boat trailer needing springs.. It is an old ez loader, 2100 lbs trailer, 26inch between bolts, with an open hook at back. Can I replace with the 25 1/4 using shackles? Do you have a complete kit with bolts? Thank you!
asked by: Joe H
Expert Reply:
To switch to a Double Eye Spring # e48SR you would need to also change out your Rear Hanger # 30-20 since you will be adding Shackles # K71-358-00. This is required since the rear hanger has to be 1-3/4" wide on the outer versus at least 1-3/4" wide on the inner like you get with a Slipper Spring Hanger # CES83FR for a Slipper Spring # e33SR.
![Bud M](https://images.etrailer.com/static/images/catg/people/2449_tn.jpg)
Products Referenced in This Question
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/8 Inch Tall
- Single Axle
- Dexter
more information >
CE Smith Front/Rear Hanger for Double-Eye Springs - 1-7/16" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Slipper Springs - 1-3/4 Inch
- 9/16 Inch Diameter
- 1-7/16 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- CE Smith
more information >
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- Open Eye
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Dacromet
- etrailer
more information >
Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 4000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Dacromet
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Picking Out Hubs and Brake Assemblies for Tandem Axle Trailer that Weighs 6k
- Q&A: Correct Orientation of MORryde ALLTREK 4000 Shock Absorbing Equalizers
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine Correct 4,000 lb Trailer Leaf Springs
- Q&A: Correct MORryde Rubber Equalizers for Forrest River 31QBH with 5,200 lb Lippert Axles
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Upgraded 26 Inch Leaf Springs For 3,500 lb Axle on Tracker Boat Trailer
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: Can New Spring Seats Be Welded Onto The Top Of An Trailer Axle Beam
- Q&A: Recommended Equalizer Shackle Strap Kit For A Tandem Axle Trailer With A 33" Wheelbase
- Article: Trailer Wiring Diagrams
Joe H.
2/13/2024
Would you recommend staying with the hook end slipper spring? And.. which one do you have that will fit my spacing between bolts? Thank you! Joe