Correct Grounding Location For The Tekonsha 118683 On A Volvo XC90
Question:
For 118683 the included instructions state that the white wire off of the module should be grounded to the frame. All your Volvo XC90 videos show the white wire connected to the negative battery terminal. Which is correct? I presume the manufacturer instructions.
asked by: Mark
Expert Reply:
To answer your question Mark, both ways are correct. The vehicles frame, or the negative battery terminal are both suitable locations for a ground. It could be the installer in that particular video just preferred to do it that way since the battery was so close. The Manufacturer instructions for the Tekonsha T-One Vehicle Wiring Harness # 118683 do say to find a grounding point near the connector such as the frame or the crossmember. It is always a good idea to stick with what the manufacturer instructions say, but you truly can do it either way. Whatever is easier for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Wiring Diagrams for Hydrastar Electric Over Hydraulic Trailer Brake Actuators
- Q&A: Where do the Springs Install on a 16K Reese 5th Wheel Trailer Hitch
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: After How Many Years Should Trailer Tires Be Replaced
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Q&A: OEM Replacement Wiring Harness Installation Assistance and Photos for 2016 Dodge Durango
- Q&A: How to Install the ZCI Wiring Harness Part # 119250KIT on a 2-Wire System
- Article: Brake Controller Installation: Starting from Scratch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: My Trailer Hitch Doesn't Fit