Replacement Axle With 58" Spring Center And 1-1/16" Spindles
Question:
Looking for a 2700# trailer axle with 58” spring center, 75.5” over all with 1 1/6” spindles
asked by: Aj B
Expert Reply:
The closest we have is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs # T20BTR-EZ-7258. This is actually the best fit for your trailer because the hub face to hub face measurement is 72", and the overall length would be closer to the 75-1/2" measurement you referenced and the spindles are 1-1/16". I would measure from the hub face to the other hub face and see if you get 72", in which case this would be a perfect fit. If you don't have hubs, measure about 7-1/2" out from the spring center.
Keep in mind, this axle is rated for 2,200 lbs and we don't have one rated for more that matches this spring center. If you wanted a higher rated axle, you'd need to weld on new spring centers to a higher rated axle.
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Search Results: 2k7158
- Q&A: Key Dimensions for Selecting Replacement 2200-Lb Trailer Axle
- Q&A: Can Trailer Axle be Replaced With 1 Larger Hub-Face Measurement
- Q&A: Axle Capacity of 1-1/2 Inch Square Axle.
- Q&A: Recommended Replacement 2,200-Lb Trailer Axle
- Q&A: Replacing Dexter 2K Trailer Axle with 70" Hub Length and 58-1/2" Spring Seat Length
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T20BTR-EZ-7258 Review
- Video: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles Installation
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Search Results: axle less trailer suspension
- Search Results: 10~9
- Search Results: spindle wear sleeves
- Q&A: Replacement Trailer Axle for a Carry On 5x8 Foot Utility Trailer
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Search Results: 25580
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Search Results: bearing buddy
- Shop: Brake Controller
- Search Results: axle
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Wiring Diagrams