Overall Length of Pin of Spring Latch F719-182Z104
Question:
Can you provide some dimensions? Like overall length of pin. Projection of pin in open position. Projection in closed dimension. I would like to use this but only have 5inch of space.
asked by: Bryan K
1
Helpful Expert Reply:
The overall length of the pin of the Paneloc Spring Latch part # F719-182Z104 is 4-1/8 inches and the projection of the pin past the mounting bracket is 1-1/4 inch.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Spring Latch w/ Extended Handle and Holdback - 2" x 1-1/8" - Zinc Plated - Left Hand
- Trailer Door Latch
- Latches
- Spring Latch
- Steel
- Non-Locking
- 2 Inch Long
- 1-1/8 Inch Hole Spacing
- 1-1/8 Inch Wide
- 3/8 Inch Pin Diameter
- Paneloc
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Determining The Correct Replacement Suspension Components For A Single Axle Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Would the Replacement Square End Cap 853-5826 Fit Gorilla Lift GL1
- Article: Overview of Lubricating Grease
- Q&A: Recommended Double Eye Leaf Springs and Hanger Kit for 3,500 Pound Axle Trailer
- Q&A: Overall Dimensions of the Hangers in Single-Axle Trailer Hanger Kit APS1
- Q&A: Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
- Q&A: Recommended Hanger Kit for Single Axle Double Eye Leaf Spring Trailer Suspension
- Q&A: Single Axle Hanger Spacing Recommendation for a Leaf Spring # e54SR and Hanger Kit # APS3
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle