Is there an 8-1/2 Inch Trailer Wheel Size
Question:
I have a trailer with the rim a little more than 8 1/2 in in diameter. the bolt is 5- 4-1/2 in diameter. I was wondering can the AM3H240 product will fit my trailer. the trailer is a 2013 HMD
asked by: Tim
Expert Reply:
The actual diameter of a wheel is not the measurement that you would go by to determine the size wheel needed or tire to fit the wheel. The actual diameter of the wheel is always higher than the listed diameter so you likely do have 8 inch wheels. If you look on the tire side wall there should be a size listed. If that size is 165/65-8 then tire and wheel combo # AM3H240 is a fit based on the bolt pattern you listed.
Product Page this Question was Asked From
Kenda 165/65-8 Bias Trailer Tire with 8" Galvanized Wheel w/ Offset - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 165/65-8
- 8 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016G
- Q&A: What is the Offset of a Trailer Wheel
- Q&A: Comparing Trailer Tire Sizes 16.5x6.5-8 and 165/65-8
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Q&A: Troubleshooting Amazon Trailer Leaf Springs Failing Within 100 Miles Of Use
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub