How to Determine the Correct Replacement Hubs for a 1994 Bayliner Capri
Question:
Hello, After reading many reviews on different hubs, Im certain you will be able to help me. I want to replace the hubs on the boat trailer. The boat is a 1994 Bayliner capri. Its a single axle trailer. I dont have a measuring tool and wonder if I might have to get one. Similar to many posts, my parts have never been changed out and part numbers are impossible to read. Im leaning towards one of these options: AKIHUB-545-35-G-EZ-K or AKIHUB-545-2-G-EZ-2K. Thanks
asked by: Darren W
Expert Reply:
Really it's going to boil down to which spindle type your Bayliner Capri has. The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K will work with 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles and wheels that are 13" to 15" - while the Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-G-EZ-2K will work with 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles and wheels that are 10" to 12".
You'll need to check out the image attached and use a set of caliper # PTW80157 and measure the seals and bearings ride. Once you have this information, you'll need to verify the bolt pattern as well. The two hubs mentioned above have a 5 on 4 1/2 for reference.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: bearing buddy 1980
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Article: How to Measure a Trailer Axle
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-2K Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30670 Review
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: btr spindle
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 1980 - Chrome Plated (Pair)
- Search Results: short hub
- Q&A: Boat Trailer Hub Recommendation with L44649 Bearings and 5 on 4-1/2" Bolt Pattern
- Search Results: grease seal 125 id
- Search Results: rod holder
- Search Results: 2k axle
- Search Results: akihub~545~2~g~ez~2k
- Q&A: How to Pick Out Hub Replacement for EZ Loader Boat Trailer
- Q&A: Recommended Axle Replacement for 40.5 x 48 Inch Harbor Freight Trailer
- Q&A: Recommended Galvanized 2K Idler Hub with 5 on 4-1/2" Bolt Pattern
- Q&A: Replacement 5 On 4-1/2 Bolt Pattern Boat Trailer Hub for 1 Inch Spindle
- Video: Review of TruRyde Trailer Spindles - EZ Lube BTR Spindle - TRU44FR
- Video: Review of Timken Trailer Bearings Races Seals - LM67048, LM67010, 203013 Kit - TMK96ZR
- Article: Trailer Tire Sizing
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - 34823 Review
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - LM67048 Review