Finding The Correct Replacement Spindle For A 2004 Floe Versa Max RT Trailer
Question:
I’m looking for a replacement spindle for the idler axle on a 2004 Floe Versa Max RT trailer 14’ dual axle. It is the type that has a castle nut holding it on the trailing arm of the torsion axle. Can you please provide me with a part number and pricing? Thanks
asked by: Steve C
Expert Reply:
We do carry several replacement spindles so we should be able to set you up. That said, we do not have a way to cross reference a year, make and model of trailer to know exactly what spindle you will need. If you can tell us the weight capacity of each axle, that will help to narrow it down quite a bit. The best way to narrow down the correct spindle is to find out the inner and outer bearing sizes that your axle uses currently. The best way to find this out is to simply pull a hub, remove the bearings and get the number off of each one.
For example the #84 E-Z Lube Spindle # TRU74FR is a very common option. This is made for a 3,500 lb axle and uses the standard # L68149 inner and # L44649 outer bearings. If you can confirm the bearing sizes that the current spindle uses, we will be able to make an accurate recommendation.
The link below will show you our full selection of replacement spindles.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: How to Charge a Dump Trailer Battery
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Q&A: Trailer Grease Seal to Replace 127194TB
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Q&A: Amount of Play on Dexter 12K Torflex Axle Under Max Load
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Maintenance Schedule
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Roadmaster Vehicle Specific Base Plates
- Article: What is Overlanding? How to Start your Overlanding Journey