Should Removing Trailer Bearing from Spindle be Difficult
Question:
Hi, I’m running into a problem with ing an outer bearing. The trailer I purchased came with an outer bearing that sticks to the spindle. I have to use a gear puller to remove the hub. The spindle measurement for the outer bearing is 1.25. A replacement bearing LM67048 doe not fit on to the spindle. Would the 15123 bearing have a slightly larger ID?
asked by: Jason
Expert Reply:
The bearings part number # LM67048 and # 15123 both have the exact same inner diameter of 1.25 inch so one would not fit easier than the other. What is most likely going on is that your spindle needs to be sanded down if it's not perfectly smooth and round or it needs to be replaced. Bearings normally do fit pretty tight but you shouldn't have to use a gear puller to get them off so that's somewhat of a red flag.
For a new spindle that matches what either bearing fits you'd want the part # TRU37FR.
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: How Much is Monthly Service for Linxup GPS Tracking Device
- Q&A: Trailer GPS Device for Trailer Installation
- Q&A: Products for Tracking a Stolen Trailer
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Replacement Keys and Lock Cores For a Rhino-Rack Zenith Rooftop Cargo Box
- Article: Replacement Automotive Lighting
- Q&A: Winch Repair Kit for Dutton-Lainson Trailer Winch Model DL1602A
- Q&A: Wiring Instructions For The Furrion Automatic Transfer Switch
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Adding Electric Over Hydraulic Disc Brakes