Replacement Lid Lift Hinge for a Thule Sonic Cargo Box

Question

Question:

Hi eTrailer team - I have a Thule Sonic SL 635B with a broken front lift strut. This model has metal cross braces at the front end on the lid and base so that the strut attaches to the box and the ball joints can connect. Do you sell this replacement hardware or know where I can find it? I love my box but cant find the hardware to get it back in service. Ive attached a screenshot from your page with the hardware / connectors circled.

asked by: Grady O

0

Expert Reply:

Since your struts aren't riveted to the box, you can use the Replacement Lid Lifter Hinge for Thule Cargo Boxes # TH14936 as a replacement.

expert reply by: Bryce D

0

Answer 1

We have the replacement bolts for the lid lifter hinges with the part #TH24FR. For the support tube cylinder you'd need the part #TH74FR, for the lifter part #TH14936, and for the support tube spacer #TH84FR.

view full answer...

Answer 2

The original hinges or struts are no longer available for the Thule Adventurer cargo boxes but the current ones, #TH14936, will fit and are what you should be using. There isn't a right and left and the orientation should not matter. It sounds…

view full answer...

Answer 3

I checked with Thule and the Summit cargo box used the QM3 hardware #TH04997. This is the only style of hardware we offer for that cargo box.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Technically none of the hitches made for the 2022 Ford Escape are designed to fit the PHEV model. However, we do have a review from a customer who successfully installed the etrailer #e89YR on their 2022 PHEV. They did take this to a local installer…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Yes, it will! The etrailer Hitch item #e89YR has been confirmed to fit the Hybrid model of the 2024 Ford Escape. This hitch is custom fit and bolts to your Escape with included hardware. It has a 2" receiver with a 525 lbs maximum tongue weight…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

I went ahead and checked the owner's manual for your 2022 Ford Escape, and you can absolutely tow your vehicle behind your class A RV. With that being said, you're going to need: -A baseplate kit, like the Roadmaster Direct-Connect Base Plate…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Replacement Lid Lift Hinge for a Thule Sonic Cargo Box

Product Page this Question was Asked From

Continue Researching