Do you Have a Trailer Axle With 85" Hub Face to Hub Face For 3,500LB Trailer Hubs?
Question:
I recently purchased AKHD-655-35-K and AKIHUB-655-35-K hubs for my duel axle trailer and neither fit the existing axles. What axles can I use to replace my existing that these hibs will fit. My axle length is approximately 85 inches from outer hub to outer hub
asked by: James K
Expert Reply:
The closest axle hub to hub width we have to 85" is our 86-1/2" 5,200LB Axle # e73SR. This axle will not fit your current hubs you purchased but it does come with brakes and hubs already.
To use the Hubs # AKHD-655-35-K & # AKIHUB-655-35-K you purchased and mount to the 85" hub face you would need to replace your axles with the Timbren Axle-Less Trailer Suspension # ASR3500S05. Otherwise you would need to visit a local axle dealer to have custom axles ordered. The Timbren has its own built in suspension so you would bolt it directly to your frame for both axles after you remove all the current suspension components you have.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 6000 lbs
- 6 on 5-1/2 Inch
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: axles
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Trailer Hub Replacement For Lippert Axle NV178936
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle
- Q&A: Difference Between Dexter 3500 lb and 4400 lb Brake Assemblies
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)