Roadmaster Comfort Ride Leaf Spring Suspension Kit For a 2022 Grand Design Reflection 150 226RK

Question

Question:

I have 2022 Grand Design 150 226rk . The axles are dexter4400 measure 3in. what should i use

asked by: Gerome R

1

Helpful Expert Reply:

You will be able to use the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2560 with the 3" Dexter 4,400lb axles on your 2022 Grand Design Reflection 150 226RK 5th wheel. This will greatly improve the ride quality for the trailer.

expert reply by: Bud M

1

Answer 1

The distance from the leaf spring hangers when using the Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2570 should be 29-1/2" or 30-1/2". The hanger spacing is determined by the trailer manufacturer and should not be…

view full answer...

Answer 2

Yes, the brackets that come with Roadmaster Comfort Ride Leaf Spring Suspension 3" Axles Kit #RM-2460-2570 accept the 9/16" U-bolt that you currently have on your 3" axles. Drilling the bolt holes to make them larger could compromise…

view full answer...

Answer 3

You will want to use the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2560. This system is for axles and suspension rated up to 5,000lbs. Since you are not increasing your weight capacity these will give you the best…

view full answer...

Answer 4

I would be happy to help! Starting with the first question you are correct that due to the increased in demand in any and everything trailer related there has been issues getting replacement leaf springs, but I have not heard of any leaf spring…

view full answer...

Answer 5

Looking at the GVWR of a 2022 Keystone Montana 3121CK you most likely have 7K axles so the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 would be what you need. To confirm you'll want to look at the axles for…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 8

Thanks for the picture of what you have and the info you listed. The correct wheel you need is the part #AM20794 that you referenced.

view full answer...

Answer 9

Is the battery of the breakaway kit charged? Does your tow vehicle have a brake controller installed?

view full answer...

Answer 10

Yes, the Furrion Automatic Transfer Switch #F30ATS has a wiring diagram on the inside of the cover. I've attached a picture of the diagram as well as a picture of the terminals with their functions.

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Roadmaster Comfort Ride Leaf Spring Suspension Kit For a 2022 Grand Design Reflection 150 226RK

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching