Correct MORryde Rubber Equalizers for Trailer With 33" Wheelbase
Question:
I am interested in purchasing the MORyde Rubber Equalizer for a tandem axel. I measured the distance from the center hub of the wheel to the other and it is 33. I assume I need Part number MR87ZR. I need to know the part number for the MORyde suspension upgrade kit greasable fittings. I will also be replacing the leaf springs and u-bolts.
asked by: Gregory I
Expert Reply:
Thank you providing that measurement. Since you have a 33" wheelbase that is correct, you need the # MR87ZR. To choose the right MORryde Suspension Upgrade Kit you will also need to measure your shackle straps. If they measure 2-1/4" from center hole to center hole you need the # MR46ZR and if it is 3-1/8" you need the # MR76ZR.
Choosing replacement leaf springs will require knowing your leaf spring length and axle capacity. The length is the spring eye to spring eye measurement. You can also use the flat length. I have attached an article below which explains how to measure.
If you don't already know your axle capacity you can check your axle tags. Once you have this information you can use the link below which will take you to our available leaf springs. From there, you can filter by capacity and length to find the right replacement. U-bolts will also require axle capacity information. If you have a 3,500 lb axle you can use the CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles # CE23002 and for 5.2k-7k axles the # CE23003.
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Trailer Leaf Spring Suspension
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- CE Smith
more information >
CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Trailer Leaf Spring Suspension
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- 7 Inch Long
- CE Smith
more information >
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Leaf Spring Suspension
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Trailer Leaf Spring Suspension
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 3-1/8 Inch Long
- Tandem Axle
- MORryde
more information >
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Q&A: Replacement Leaf Springs For Dexter 072-042 4-Leaf Springs
- Q&A: Determining The Correct Replacement Equalizers For A Tandem Axle Trailer With 5,200lb Axles
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Q&A: Does MORryde Shackle Kit Fir With Equa-Flex System
- Q&A: How To Tell Which MORryde Equalizers Will Fit A 2012 Jayco 26BH
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Most Popular Wheel Bearings
- Article: Trailer Maintenance Schedule