Does The Demco Actuator DM72VR Require Two Or Three Bolts For Installation?
Question:
My old actuator only has 2 bolts. Do I need to bore hole for 3 bolt on this actuator.
asked by: Gerald W
0
Expert Reply:
Two bolts will be sufficient for installing the Demco Hydraulic Brake Actuator # DM72VR. You will want to use two Requires 2-1/2" x 4-1/2" Grade-5 of Grade-8 bolts. Personally I would use something like the Curt Coupler Hardware Kit # C25388. While you certainly could drill a 3rd hole and use a 3rd bolt, it is not required.
expert reply by:
Jesse M
0
Products Referenced in This Question
Curt Channel-Mount Coupler Hardware Kit
- Accessories and Parts
- Adjustable Trailer Coupler
- Mounting Hardware
- CURT
more information >
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Demco
more information >
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Demco
more information >
Continue Researching
- Q&A: Preferred Method For Bolting On A Demco Hydraulic Brake Actuator DM72VR
- Shop: Suspension Enhancement
- Shop: Dexter Trailer Hub and Drum Assembly for 3,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 10,000 lbs
- Shop: Grille Guard
- Q&A: Difference Between Timbren and SumoSpring Jounce Springs for a 2021 Toyota Tundra
- Search Results: 8705101
- Shop: Timbren Active Off-Road Bumpstops w/ U-Bolt Flip Kit - Rear Suspension - 4,800 lbs
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Pro Series Mounting Bolts for Adjustable-Channel Couplers
- Shop: Buyers Products Heavy Duty Channel Bolt and Nut Kit
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement Surge Brake Actuator For Atwood 85736 That Is Discontinued
- Q&A: Replacement Actuator for an Older Atwood 85736
- Q&A: Recommended Replacement Reverse Lockout Solenoid for a Demco DA70 Actuator
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Trailer Hitch Coupler
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)