Is there a 1-1/4" Hitch for a 2024 Subaru Crosstrek Hybrid?
Question:
Is there a 1-1/4" hitch for a 2024 Subaru Crosstrek Hybrid?
asked by: Lucy
Expert Reply:
Yes, there is! To install a 1-1/4" hitch on your 2024 Subaru Crosstrek Hybrid you will need the Draw-Tite item # 36644. This hitch is custom fit and bolts to your Subaru with included hardware. This hitch fits all models of the 2024 Crosstrek.
The Draw-Tite item # 36644 is a class II hitch with a 1-1/4" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. You will want to verify what your Subaru's actual capacity is because this hitch is most likely rated for more than the hybrid models are.
I have attached a couple of pictures below along with an installation video to help you get this hitch set up and show you what it looks like once installed.
If you are planning on towing you will also need a wiring harness item # 119250KIT and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Will EcoHitch Stealth Fit 2023 Subaru Crosstrek Hybrid and Kuat NV 2.0 Bike Rack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does EcoHitch # 306-X7365 Fit 2024 Subaru Crosstrek Wilderness
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Do I Need Additional Fuses for the Main Fuse Box on a 2024 Honda Pilot to Power a Wiring Harness?
- Q&A: Is The EcoHitch Trailer Hitch Receiver # 306-X7365 Hidden Completely on 2024 Crosstrek Wilderness?
- Q&A: Size of Bolts on etrailer Trailer Hitch Receiver e98912
- Q&A: Is There A Hitch Made Specifically For The 2024 Subaru Crosstrek Wilderness?
- Article: Rooftop Cargo Carriers
- Article: Performance Chips and Modules
- Article: Trailer Wiring Diagrams
- Article: Trailer Hitch Installation Tips
- Article: How to Measure for Trailer Hitch Drop