Recommended Hitch for a 2022 Toyota C-HR
Question:
Do you have a hitch for a 2022 Toyota C-HR?
asked by: James C
Expert Reply:
Yes, we do. To add a hitch to your 2022 Toyota C-HR, I recommend the Curt item # C11567. This hitch is custom fit and bolts to your Toyota with included hardware.
The Curt Hitch item # C11567 is a class I hitch with a 1-1/4" receiver. It is the highest capacity hitch available for your car with a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 1-1/4" receiver exposed. This not only looks better but also helps with ground clearance.
I have attached a couple of pictures below along with an installation video to help you get this hitch set up and show you what it looks like once installed.
If you are planning on towing you will also need a wiring harness item # C56384 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch Installation for 2022 Toyota Corolla Hatchback
- Q&A: Will Trailer Hitch for a 2019 Toyota Corolla Sedan Fit Hatchback Model
- Q&A: Hitch for a 2021 Toyota Corolla Hatchback
- Q&A: Can Curt Trailer Hitch C11567 Be Used To Tow 589lb Trailer W/ 2020 Toyota Corolla Hatchback SE?
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Article: Hitch Adapters and Extenders
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is Difference Between Curt Hitches that Fit 2021 Toyota C-HR
- Article: Trailer Wiring Diagrams
- Q&A: 1-1/4" Hitch Recommendation For 2020 Toyota Corolla Hatchback
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: Rooftop Cargo Carriers
- Article: How to Measure for Trailer Hitch Drop