Is there a 2 Hitch for a 2023 Kia Seltos?
Question:
Does anyone make a 2" hitch for a 2023 Kia Seltos?
asked by: Jeff
Expert Reply:
No, there is not. The only hitch available for the 2023 Kia Seltos is the Curt item # C65FR. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
I really like this hitch because the crosstube mounts completely behind the rear bumper leaving only the 1-1/4" receiver exposed. This not only looks better but it helps with ground clearance.
I have attach a couple of pictures below along with an installation video so you can see what this hitch looks like once installed.
If you are planning on towing you will also need a wiring harness item # C89KR and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does Draw Tite Hitch for 2022 Kia Seltos Come with all Hardware Needed to Install
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Hitch For 2021 Kia Seltos To Carry Bike Rack
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended 2" Hitch for a 2021 Kia Seltos
- Q&A: Recommended Single Bike Rack for a Tern HSD P9 Bike With Fenders
- Q&A: Difference In Factory Lifestyle Hitch And Frame Mounted Hitch 2021 Kia Seltos
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch for a 2024 Kia Seltos
- Article: Rooftop Cargo Carriers
- Article: 2023 Best Gifts for Haulers & Towers
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)