Will Fulton Hi-Mount Spare Tire Carrier # FHDSTC0101 Fit 15-Inch Wheel with 6-on-5-1/2-inch Pattern
Question:
My trailer spare tire is on a 6 lug, 15inch wheel. The bolt spacing is 5inch center-to-center between opposite bolts on the diameter, and 2 3/4inch between adjacent bolts. I understand that only bolt spacing of between 3 3/4inch and 4 3/4inch will work with this carrier. Is that correct? Bolt spacing on my wheel is 4 3/4inch between one bolt and the bolt following the adjacent bolt. That is to say, on my 6 bolt wheel the spacing between bolts holes 1 and 3 is 4 3/4, if you number the bolts 1 - 6 going clockwise our counterclockwise, who cares!. Thank you in advance for your help.
asked by: Jan
Helpful Expert Reply:
Thank you for providing the photo of your trailer spare tire/wheel.
Based on your photo it appears you have the Dexstar Steel 15 x 6-Inch Spoke Trailer Wheel with 6-on-5-1/2-inch bolt pattern. This is our part # AM20532. This size wheel and bolt pattern are among those compatible with the Fulton Hi-Mount Spare Tire Carrier # FHDSTC0101.
If you measure from the center of any hole on the wheel to the center of the hole directly opposite you should find a center-to-center distance of 5-1/2-inches. If this is the case then your wheel will fit the Fulton Hi-Mount Spare Tire Carrier.
The linked article explains wheel bolt patterns.
Products Referenced in This Question
Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Product Page this Question was Asked From
Fulton Hi-Mount Spare Tire Mount - Fits 4-, 5-, and 6-Lug Wheels
- Spare Tire Carrier
- Frame Mount
- Offset Style
- 4-Bolt
- 5-Bolt
- 6-Bolt
- Trailer
- 4-3/4 Inch Lift
- Fulton
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Spare Tire Carrier Recommendation for Trailer Frame that works with 6 Lug Wheel
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Dimensions of U-Bolts Included with Fulton Hi-Mount Spare Tire Carrier FHDSTC0101
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Spare Tire Carrier Recommendation for Trailer Wheel with 5 on 5 inch Bolt Pattern
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Will Fulton Hi-Mount Spare Tire Carrier # FSTC1000301 Work on 5 x 10 V-Nose Trailer w/ Short Tongue
- Q&A: Troubleshooting A Bouncy Ride On A Vanleigh RV Vilano 325RL Fifth Wheel Trailer
- Q&A: Replacement Axle Bearings, Races and Seal for Dexter 5,200 lb Axle
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)