Troubleshooting 2023 Mazda CX-5 Wiring Harness Causing Driver's Side Blinker to Blink Fast
Question:
I have the same problem on a 2023 Mazda CX-5. After I plugged in the wiring harness into the driver’s side rear harness the driver’s side signal blinks fast but the passenger side flashes normal. When I unhook it and try the signal it blinks normal. There is nothing plugged in to the trailer plug and It is grounded by itself and has a clean metal surface.
asked by: Danny B
Expert Reply:
It sounds like you've installed the Curt T-Connector Vehicle Wiring Harness # C45FV on your 2023 Mazda CX-5 and something is shorting out.
While there is the option to get the wiring harness replaced under warranty, the best thing to do is check all of our connections (like what you did with the ground) to ensure this doesn't happen with any other wiring kit.
Double check that the ground is properly secured to a clean, bare-metal surface, and then look at the connectors and make sure they are clean and free of any debris and dirt as well. Anything in them can cause issues so we have to check all of that first.
If everything looks good then the wiring kit itself could very well be the problem and you'll want to get that replaced under warranty.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Can I get Replacement Keys For a Trailer Hitch Receiver Lock?
- Q&A: 2024 Mazda CX-5 Trailer Hitch and Wiring Recommendations with Mounting Brackets
- Article: Trailer Wiring Diagrams
- Q&A: How Long Does it Take to Install Roadmaster Base Plate Kit
- Q&A: Recommended Hitch for a 2023 Mazda CX-5
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Ladder Rack System For A 2022 Ford F-150 With A Factory Tonneau Cover
- Q&A: Will BAKFlip MX4 Fit 2017 Ford F-150 5-1/2 foot Bed with TracRac SR Sliding Ladder Rack
- Q&A: Will TracRac SR Ladder Rack Work with BAK Revolver X4s Tonneau Cover On 2022 Ford F-150 5.5' Bed
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure for Trailer Hitch Drop