Are Electric Over Hydraulic Brakes Required To Have Trailer Brakes Work at Boat Ramp?
Question:
Hi there, I need to put brakes on my boat trailer. In order to be able to have trailer brake power while backing into the ramp is it true that I have to either use electric brakes or eoh? Thank you on advance!
asked by: Tyler R
Expert Reply:
You will need to use electric over hydraulic brakes to back down a boat ramp and still have the brakes apply. A Surge Actuator # DM72VR will not apply the brakes since the weight of the trailer is pulling the trailer back down the hill versus pushing into the tow vehicle. I do not recommend using electric only brakes since the electromagnet for the brakes will be submerged in water when launching or retrieving your boat.
You will want to add either the Hydrastar kit for Drum # HS481-8065 or Disc # HS481-8067 brakes if you already have hydraulic brakes. Do remember to replace any surge actuator you may have for a Standard Coupler # DM15000-52 so you do not have to worry about the surge coupler becoming damaged since it will no longer be used. Please let me know what you have if you do not already have any brakes on your trailer.
Products Referenced in This Question
Demco Channel Tongue Trailer Coupler - eZ-Latch - Silver - 2" Ball - Bolt On - 10,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 10000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Hydrastar Vented Marine Electric Over Hydraulic Actuator for Drum Brakes - OEM - 1,000 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1000 psi
- Drum Brakes
- Hydrastar
more information >
Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Demco
more information >
Continue Researching
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Replacement Surge Brake Actuator For Atwood 85736 That Is Discontinued
- Q&A: Replacement for Atwood Surge Brake Actuator 85778
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Actuator for an Older Atwood 85736
- Q&A: Bearings For Older Trailer Hub 22834
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)