Firestone Kit # F299 Installation on a 2007 Dodge Ram 2500 4x4 Tied Into Air Horn System
Question:
I already have an on board air system for my air horns. How would I connect the bags to be inflated and deflated in the cab?
asked by: Jon M
Expert Reply:
My contacts at the manufacturer did not recommend using a high pressure compressor like the ones that typically are used for air horns for an on board system to inflate the air helper springs.
The maximum PSI that the Firestone Ride Rite Air Helper Springs # F2299 is 100 PSI, and it is possible that with a high pressure output compressor, you might over-inflate the airbags very quickly.
If you would like an in cab option for inflating your airbags I recommend using the Firestone Dual Electric Air Command with a Standard Duty Compressor # F2178. This kit will allow you to make adjustments to the airbags while in the cab of your truck. The dual function switches allow for easy inflating and deflating as needed. It also allows for monitoring of the air pressure in the bags from your cab.
Thank you for including your photo of your current towing set up. The Firestone Compressor Kit # F2178 will be extremely helpful for you considering the variations of loads you may encounter if your towing needs change.
I have included a link to the instructions for installing this kit. Please keep in mind that all tubing should be cut square, and a Tubing Cutter # AL10530, or similar device is recommended for installation of this compressor kit.
Products Referenced in This Question
Firestone Air Command Standard Duty Air Compressor - Analog - Dual Path
- Air Suspension Compressor Kit
- Wired Control
- Dual Path
- Analog Display
- 100 psi
- Firestone
more information >
Product Page this Question was Asked From
Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Air Springs
- Heavy Duty
- Firestone
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Best Air Bag Suspension (2023)
- Q&A: Can B&W Pintle Hook Mounting Plate Be Mounted in Rise Position
- Q&A: Comparing SumoSprings and Air Bags for a 2021 Ram 2500
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Choosing Between Air Lift Load Lifter 5000 or 7500 For 2018 Ram 2500 Towing 5th Wheel
- Q&A: Air Bag System for a 2022 Ram 3500 Cab and Chassis
- Q&A: Where is Hole Location For B&W Gooseneck on 2007 Dodge Ram 2500 With 6-1/2 Foot Bed
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Availability of 63 Inch Replacement Support Arm for Solera Awning
- Q&A: Difference Between Landing Gear Follow Leg Replacements # LC119101 and # LC179014
- Article: How to Mount a Truck Bed Camper
- Article: Ram Trailer Tow Prep Package
- Article: Trailer Wiring Diagrams
- Article: The Basics: Firestone Air-Spring Kits